VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)

DTC 71 CHANGE RANGE OF STEERING ANGLE SENSOR IS TOO BIG

DTC DETECTING CONDITION:

Defective steering angle sensor

TROUBLE SYMPTOM:

• VDC does not operate.

• ABS does not operate.

WIRING DIAGRAM:

• LHD model

• RHD model

STEPCHECKYESNO

1.CHECK THE VDCCM.

1) Turn the ignition switch to OFF.

2) Connect all connectors.

3) Erase the memory.

4) Perform the Inspection Mode.

5) Read the DTC.

Is the same DTC as current diagnosis still displayed?

Replace the VDCCM.

2.CHECK ANY OTHER DTC ON DISPLAY.

Is any other DTC displayed?

Proceed with the diagnosis corresponding to the DTC.

Temporary poor contact occurs.