1. Set the vehicle on a lift.
2. Disconnect the ground cable from the battery.
3. Unclip the clip fastening the harness and disconnect the following connectors.
(1) Front oxygen (A/F) sensor connector
(2) Rear oxygen sensor connector
|
(A) |
Front oxygen (A/F) sensor connector |
|
(B) |
Rear oxygen sensor connector |
|
(C) |
Clip |
4. Lift up the vehicle.
5. Separate the center exhaust pipe from rear exhaust pipe.
6. Remove the under cover.
7. Remove the nuts which hold front exhaust pipe onto cylinder heads.
CAUTION:
Be careful not to pull down the front and center exhaust pipe assembly.
8. Remove the bolt which holds center exhaust pipe to hanger bracket.
9. Remove the front and center exhaust pipe assembly from the vehicle.
CAUTION:
• Be careful not to let the front and center exhaust pipe assembly fall off when removing as it is quite heavy.
• After removing the front and center exhaust pipe assembly, do not apply excessive pulling force on the rear exhaust pipe.
10. Separate the front exhaust pipe from center exhaust pipe.
11. Remove the front oxygen (A/F) sensor and rear oxygen sensor. 