1. Apply a coat of spray type lubricant to the mating area of cushion rubber.
2. Install the rear exhaust pipe bracket to cushion rubber.
3. Install the rear exhaust pipe to muffler.
NOTE:
• Use a new gasket and self-locking nut.
• When the lubricant was applied to the cushion rubber during the removal/installation, degrease it after reassembling.
Tightening torque:
48 N·m (4.9 kgf-m, 35.4 ft-lb)
4. Install the rear exhaust pipe to center exhaust pipe.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
