1. Install the radiator main fan motor assembly to the radiator.
2. Lift up the vehicle.
3. Lift the radiator outlet hose and float the radiator from the radiator under cover. Connect the ATF hose to 2 locations on the clip of radiator main fan motor assembly. (AT model)
NOTE:
Make pins on the lower side of radiator be fitted into the vehicle side.
4. Tighten the attachment bolts of the radiator under cover. (AT model)
5. Connect the radiator main fan motor connector (A) and sub fan motor connector (B).
6. Install the under cover.
7. Lower the vehicle.
8. Attach the power steering hose to the radiator.
9. Connect the radiator inlet hose.
10. Install the mounting bolts to radiator main fan motor assembly.
Tightening torque:
4.9 N·m (0.50 kgf-m, 3.6 ft-lb)
11. Install the reservoir tank.
Tightening torque:
7.5 N·m (0.76 kgf-m, 5.5 ft-lb)
12. Install the over flow hose.
13. Install the radiator upper brackets. (AT model)
14. Connect the battery ground cable to the battery.
15. Fill engine coolant. 
1. Install the radiator main fan motor assembly to the radiator.
2. Lift up the vehicle.
3. Lift the radiator outlet hose and float the radiator from the radiator under cover. Connect the ATF hose to 2 locations on the clip of radiator main fan motor assembly. (AT model)
NOTE:
Make pins on the lower side of radiator be fitted into the vehicle side.
4. Tighten the attachment bolts of the radiator under cover. (AT model)
5. Connect the radiator main fan motor connector (A) and sub fan motor connector (B).
6. Install the under cover.
7. Lower the vehicle.
8. Connect the power steering hose to the clip on the radiator.
9. Connect the radiator inlet hose and the over flow hose to radiator.
|
(A) |
Radiator inlet hose |
|
(B) |
Air breather hose |
|
(C) |
Over flow hose |
10. Install the mounting bolts to radiator main fan motor assembly.
Tightening torque:
4.9 N·m (0.5 kgf-m, 3.6 ft-lb)
11. Install the reservoir tank.
Tightening torque:
7.5 N·m (0.76 kgf-m, 5.5 ft-lb)
12. Install the radiator upper brackets. (AT model)
13. Connect the battery ground cable to the battery.
14. Fill engine coolant.
15. Install the collector cover.