Install in the reverse order of removal.
NOTE:
Use a new gasket.
Tightening torque:
T: 54 N·m (5.5 kgf-m, 40 ft-lb)
|
(A) |
O-ring |
|
(B) |
Oil cooler |
|
(C) |
Oil cooler connector |
1. Install in the reverse order of removal.
2. Touch the adapter (1) knock pin (A) to the cylinder block rib (B) to install the adapter (1).
3. Install the adapter (2).
4. Touch the engine oil cooler stopper (A) to the adapter (2) rib (B) to install the engine oil cooler.
5. When installing the plug, apply liquid gasket to the plug screw.
Liquid gasket:
THREE BOND 1324 (Part No. 004403042) or equivalent
Tightening torque:
T1: 45 N·m (4.6 kgf-m, 33.2 ft-lb)
T2: 6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
T3: 54 N·m (5.5 kgf-m, 40 ft-lb)
T4: 69 N·m (7.0 kgf-m, 51 ft-lb)
NOTE:
Use new O-rings and gasket.
|
(A) |
Adapter (1) |
|
(B) |
Adapter connector |
|
(C) |
Adapter (2) |
|
(D) |
Oil cooler |
|
(E) |
Oil cooler connector |
|
(F) |
Plug |
|
(G) |
Gasket |
|
(H) |
O-ring |