NOTE:
Use a new gasket.
1. Install the front exhaust pipe and the exhaust manifold.
Tightening torque:
35 N·m (3.6 kgf-m, 26.0 ft-lb)
2. Install the front exhaust pipe cover.
Tightening torque:
7.5 N·m (0.8 kgf-m, 5.5 ft-lb)
3. Install the exhaust manifold upper cover (RH).
Tightening torque:
19 N·m (1.9 kgf-m, 14.0 ft-lb)
4. Install the front exhaust pipe assembly.
Tightening torque:
35 N·m (3.6 kgf-m, 26.0 ft-lb)
5. Connect the exhaust manifold (RH) to turbocharger joint pipe.
Tightening torque:
T1: 35 N·m (3.6 kgf-m, 26.0 ft-lb)
T2: 40 N·m (4.0 kgf-m, 28.9 ft-lb)
6. Install the exhaust manifold lower cover (RH) and the exhaust manifold cover (LH).
Tightening torque:
19 N·m (1.9 kgf-m, 14.0 ft-lb)
7. Install the front oxygen (A/F) sensor. 
8. Install the under cover.
9. Connect the battery ground cable to the battery.
10. Install the collector cover.