NOTE:
• Use a new gasket and self-locking nut.
• When the lubricant was applied to the cushion rubber during the removal/installation, degrease it after reassembling.
1. Install the rear exhaust pipe to cushion rubber.
2. Install the rear exhaust pipe to muffler.
Tightening torque:
48 N·m (4.9 kgf-m, 35.4 ft-lb)
3. Install the rear exhaust pipe to center exhaust pipe.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
4. Lower the vehicle.
5. Connect the battery ground cable to the battery.
