1. Fasten the cam sprocket and install to the cam shaft using ST.
NOTE:
Do not confuse left and right side cam sprockets during installation.
| ST 499207400 | CAM SPROCKET WRENCH |
Tightening torque:
Tighten to 30 N·m (3.0 kgf-m, 21.8 ft-lb) of torque, and then tighten further by 45°.
| ST 499977500 | CAM SPROCKET WRENCH |
Tightening torque:
Tighten to 30 N·m (3.0 kgf-m, 21.8 ft-lb) of torque, and then tighten further by 45°.
2. Install the timing belt. 
3. Install the timing belt cover.
4. Install the crank pulley.
5. Install the V-belts.