1. Set the vehicle on a lift.
2. Disconnect the ground cable from the battery.
3. Disconnect the front oxygen (A/F) sensor connector.
|
(A) |
Front oxygen (A/F) sensor connector |
|
(B) |
Rear oxygen sensor connector |
4. Remove the clip holding the harness.
5. Lift the vehicle.
6. Remove the under cover.
7. Apply spray-type lubricant to the threaded portion of front oxygen (A/F) sensor, and leave it for one minute or more.
8. Remove the front oxygen (A/F) sensor.
CAUTION:
When removing the front oxygen (A/F) sensor, wait until exhaust pipe cools, otherwise it will damage the exhaust pipe.
|
(A) |
Front oxygen (A/F) sensor |
|
(B) |
Rear oxygen sensor |