1. Using ST1 and ST2, remove the hub from the rear housing.
| ST1 927080000 | HUB STAND |
| ST2 927420000 | HUB REMOVER |
2. Remove the back plate from the rear housing
3. Remove the outer and inner oil seals using a flat tip screwdriver.
4. Remove the snap ring using a flat tip screwdriver.
CAUTION:
Be careful not to damage housing during removal.
5. Using ST1 and ST2, remove the bearing by pressing the inner race.
| ST1 927430000 | HOUSING STAND |
| ST2 927440000 | BEARING REMOVER |
6. Remove the tone wheel bolts and remove the tone wheel from the hub (model with ABS).
7. Using ST, press the hub bolt out.
| ST 927080000 | HUB STAND |
CAUTION:
Be careful not to hammer the hub bolts. Doing so may deform the hub.
