1. Insert the sleeve yoke into the transmission and attach the center bearing to the body.
Tightening torque:
52 N·m (5.3 kgf-m, 38.3 ft-lb)
2. Align the alignment marks and connect the flange yoke and rear differential.
Tightening torque:
31 N·m (3.2 kgf-m, 23.1 ft-lb)
|
(A) |
Alignment mark |
3. Using new bolts, install the differential mount front cover.
(1) Temporarily tighten bolt A while pushing the cover towards the front of the vehicle.
(2) Tighten bolts B to the specified torque.
(3) Tighten the bolts A to the specified torque.
(4) Tighten the remaining bolts to the specified torque.
Tightening torque:
90 N·m (9.2 kgf-m, 66 ft-lb)
4. Install the center exhaust pipe.
Non-turbo model
Turbo model
5. Install the rear exhaust pipe and muffler.
Non-turbo model
Turbo model