1. Remove the adjusting hole cover from the back plate.
2. Turn the adjusting screw using a flat tip screwdriver until the brake shoe is in close contact with the disc rotor.
|
(1) |
Adjusting screw |
|
(2) |
Adjusting hole cover (rubber) |
|
(3) |
Flat tip screwdriver |
|
(4) |
Back plate |
3. Turn back (downward) the adjusting screw 3 to 4 notches.
4. Install the adjusting hole cover to the back plate.
1. Remove the console box lid.
2. Forcefully pull the parking brake lever 3 to 5 times.
3. Rotate to adjust the self-locking nut so that the lever stroke of the parking brake lever is 7 to 8 notches when applying the parking brake with force of 196 N (20 kgf, 44 lbf).
|
(1) |
Parking brake lever |
|
(2) |
Self-locking nut |
4. Install the console box lid.
Lever stroke:
7 to 8 notches when pulled with a force of 196 N (20 kgf, 44 lbf)