1. Release the parking brake.
2. Remove the two mounting bolts and remove the brake caliper assembly.
|
(1) |
Brake caliper ASSY |
3. Suspend the brake caliper assembly so that the hose is not stretched.
4. Remove the disc rotor.
NOTE:
If the disc rotor is difficult to remove, try the following two methods in order.
(1) Turn the adjusting screw using a flat tip screwdriver until the brake shoe moves adequately away from the disc rotor.
|
(1) |
Adjusting screw |
|
(2) |
Adjusting hole cover (rubber) |
|
(3) |
Flat tip screwdriver |
|
(4) |
Back plate |
(2) If disc rotor is seized on the hub, drive the disc rotor out by pushing two 8 mm bolts in holes B on the rotor.
5. Remove the shoe return spring from the parking brake assembly.
6. Remove the front shoe hold down spring and pin with pliers.
7. Remove the strut and strut spring.
8. Remove the adjuster assembly from the parking brake assembly.
9. Remove the brake shoe.
10. Remove the rear shoe hold down spring and pin with pliers.
11. Remove the parking brake cable from the parking brake lever.
|
(1) |
Parking brake cable |
|
(2) |
Parking brake lever |
12. Using a flat tip screwdriver, raise the retainer. Remove the parking lever and washer from brake shoe.