1. Remove the boot ring.
|
(1) |
Boot ring |
2. Remove the piston boot.
3. Place a wooden block in caliper body as shown in the figure to prevent the piston from jumping out and being damaged, then gradually apply compressed air via installation hole of brake hose to push piston out.
|
(1) |
Place a wood block of 30 mm (1.18 in) width. |
4. Remove the piston seal from caliper body cylinder.
CAUTION:
Do not damage the caliper body cylinder and piston seal groove.
5. Remove the lock pin sleeve and pin boot from caliper body.
6. Remove the guide pin (green) and pin boot.