1. Install the disc rotor to hub.
2. Install the support to the housing.
Tightening torque:
53 N·m (5.4 kgf-m, 39 ft-lb)
3. Apply a thin coat of Molykote M7439 to the pad clip.
4. Install the pad to support.
5. Install the caliper body to the support.
Tightening torque:
37 N·m (3.8 kgf-m, 27.3 ft-lb)
6. Connect the brake hose using the new gaskets.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
CAUTION:
When connecting the brake hose, do not twist it.
7. Bleed air from the brake system. 