BRAKE > Rear Brake Pad

INSPECTION

Check the pad thickness A.

Pad thickness

Standard

9 mm (0.35 in)

Wear limit

1.5 mm (0.059 in)

NOTE:

Always replace the pads of both sides as a set.

Replace pad clips if they are twisted or worn.

There is a wear indicator on the RH side inner pad. If the pad is worn to the limit, the end of wear indicator contacts disc rotor, and a squeaking sound is heard as the wheel rotates. If the sound is heard, replace the pad.

Replace if there is any oil or grease on the pad.