1. Set the vehicle on a lift.
2. Loosen the wheel nuts.
3. Lift-up the vehicle, and remove the front wheels.
4. Remove the lower caliper bolts.
5. Raise the caliper body and support it.
NOTE:
Brake hose must not be disconnected from caliper body.
6. Remove the pad.
NOTE:
If the brake pad is difficult to remove, proceed as follows:
(1) Remove the caliper body from support.
(2) Remove the support.
(3) Place the support between wooden blocks in the vise.
|
(1) |
Support |
|
(2) |
Wooden block |
(4) Apply a rod with 12 mm (0.47 in) diameter or less to the shaded area of brake pad, and strike the rod with a hammer to remove brake pad.
