1. Move the brake and clutch pedal pads in the lateral direction with a force of approx. 10 N (1 kgf, 2 lbf), and check that the pedal deflection is within specifications.
CAUTION:
If excessive deflection is found, replace the bushing with a new part.
Deflection of the brake and clutch pedal:
Service limit:
5.0 mm (0.197 in) or less
• AT model
|
(1) |
Brake pedal |
• MT model
|
(1) |
Clutch pedal |
|
(2) |
Brake pedal |
2. Check the position of pedal pad.
Pedal height L:
148 mm (5.83 in)
Brake pedal free play A:
1 — 3 mm (0.04 — 0.12 in) [When pressing the brake pedal with a force of less than 10 N (1 kgf, 2 lbf).]]
|
(1) |
Stop light switch |
|
(2) |
Mat |
|
(3) |
Toe board |
|
(4) |
Operating rod |
3. If it is not within the specification, adjust it by adjusting the brake booster operating rod length.