1. Drain brake fluid from the master cylinder reservoir tank.
2. Remove the adjusting nut and lock nut.
|
(1) |
Adjusting nut |
|
(2) |
Lock nut |
|
(3) |
PHV |
3. Remove the cable clamp, and disconnect the PHV cable from the PHV.
CAUTION:
When disconnecting the PHV cable, protect it carefully so as not to damage the boot and inner cable.
|
(1) |
PHV cable |
|
(2) |
Clamp |
4. Disconnect the brake pipes from the PHV.
CAUTION:
• Do not let brake fluid come into contact with the painted surface of the vehicle body. Completely wash away with water immediately and wipe off if it was accidental.
• Use a pipe wrench so that the hex head of the flare nut is not damaged.
5. Separate the PHV from side frame, along with the support.
CAUTION:
When removing the PHV, take great care that no foreign objects enter inside.
|
(1) |
PHV |
1. Remove the adjusting nut and lock nut.
|
(1) |
Adjusting nut |
|
(2) |
Lock nut |
|
(3) |
PHV |
2. Remove the cable clamp, and disconnect the PHV cable from the PHV.
CAUTION:
When disconnecting the PHV cable, protect it carefully so as not to damage the boot and inner cable.
|
(1) |
PHV cable |
|
(2) |
Clamp |
3. Remove the cable clamp from the clutch pedal bracket.
• LHD model
|
(1) |
Clamp |
|
(2) |
PHV cable |
|
(3) |
Clutch pedal |
• RHD model
|
(1) |
Clamp |
|
(2) |
PHV cable |
|
(3) |
Clutch pedal |
4. Remove the PHV cable.