1. Install the joint to the transmission and secure with spring pin.
2. Insert the lever COMPL from room side.
NOTE:
After inserting the rod and stay, temporarily put them onto transmission mount.
3. Lift the vehicle.
4. Install the joint to the shifter arm.
5. Insert the spring pin.
|
(A) |
Joint |
|
(B) |
Spring pin |
6. Mount the cushion rubber on the body.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
|
(A) |
Stay |
|
(B) |
Cushion rubber |
7. Connect the rod to the joint.
Tightening torque:
12 N·m (1.2 kgf-m, 8.9 ft-lb)
|
(A) |
Stay |
|
(B) |
Rod |
8. Connect the stay to the transmission bracket.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
|
(A) |
Stay |
|
(B) |
Transmission bracket |
9. Install the rear exhaust pipe and muffler.
Non-turbo model
Turbo model
10. Lower the vehicle.
11. Install the plate COMPL to body.
Tightening torque:
7.5 N·m (0.76 kgf-m, 5.5 ft-lb)
12. Install the boot & insulator to vehicle in proper direction.
13. Install the clamp.
14. Install the console box.