1. Set the vehicle on a lift.
2. Remove the gear shift knob.
3. Disconnect the ground cable from the battery.
4. Remove the console box. 
5. Remove the clamp.
6. Remove the bushing & insulator.
7. Remove the plate COMPL from vehicle body.
8. Lift the vehicle.
9. Remove the rear exhaust pipe and muffler.
Non-turbo model
Turbo model
10. Remove the stay from transmission bracket.
|
(A) |
Stay |
|
(B) |
Transmission bracket |
11. Remove the rod from joint.
|
(A) |
Stay |
|
(B) |
Rod |
12. Remove the cushion rubber from vehicle body.
|
(A) |
Stay |
|
(B) |
Cushion rubber |
13. Remove the spring pin, and then extract the joint.
|
(A) |
Joint |
|
(B) |
Spring pin |
14. Lower the vehicle.
15. Remove the lever COMPL.
