|
ILLUSTRATION |
TOOL NUMBER |
DESCRIPTION |
REMARKS |
|
|
498575400 |
OIL PRESSURE GAUGE ASSY |
Used for measuring oil pressure. |
|
|
498897200 |
OIL PRESSURE GAUGE ADAPTER |
Used at the oil pump housing when measuring reverse clutch pressure and line pressure. |
|
|
498897700 |
OIL PRESSURE ADAPTER SET |
Used for measuring the transfer clutch pressure. |
|
|
498545400 |
OIL FILTER WRENCH |
Used for removing and installing the ATF filter. |
|
|
498277200 |
STOPPER SET |
Used for removing and installing the automatic transmission assembly. |
|
|
41099AC000 |
ENGINE SUPPORT ASSY |
Used for supporting the engine. |
|
|
398527700 |
PULLER ASSY |
• Used for removing the extension case roller bearing. • Used for removing the extension oil seal. • Used for removing the front differential side retainer bearing outer race. • Used for removing the front differential side retainer oil seal. |
|
|
498057300 |
INSTALLER |
Used for installing the extension oil seal. |
|
|
498077000 |
REMOVER |
Used for removing the differential taper roller bearing. |
|
|
499247400 |
INSTALLER |
• Used for installing the transfer outer snap ring. • Used together with the GUIDE (499257300). |
|
|
499257300 |
SNAP RING OUTER GUIDE |
• Used for installing the transfer outer snap ring. • Used together with the INSTALLER (499247400). |
|
|
18630AA010 |
WRENCH COMPL RETAINER |
• Used for removing and installing the differential side retainer. • WRENCH ASSEMBLY (499787000) can also be used. |
|
|
398437700 |
DRIFT |
Used for installing the torque converter case oil seal. |
|
|
398487700 |
INSTALLER |
Used for installing the front differential taper roller bearing. |
|
|
398673600 |
COMPRESSOR |
Used for removing and installing the clutch spring. |
|
|
498255400 |
PLATE |
Used for measuring the backlash of hypoid gear. |
|
|
399893600 |
PLIERS |
Used for removing and installing the clutch spring. |
|
|
498247001 |
MAGNET BASE |
• Used for measuring the gear backlash. • Used together with the DIAL GAUGE (498247100). |
|
|
498247100 |
DIAL GAUGE |
• Used for measuring the gear backlash. • Used together with the MAGNET BASE (498247001). |
|
|
498517000 |
REPLACER |
Used for removing the front roller bearing. |
|
|
398623600 |
SEAT |
Used for removing the spring of the transfer clutch piston. |
|
|
28399SA000 |
DRIVE SHAFT REMOVER |
Used for removing the axle shaft. |
|
|
28399SA010 |
OIL SEAL PROTECTOR |
Used for installing the axle shaft. |
|
|
499267300 |
STOPPER PIN |
Used for installing the inhibitor switch. |
|
|
499787700 |
WRENCH |
Used for removing and installing the drive pinion lock nut. |
|
|
499787500 |
ADAPTER |
Used for removing and installing the drive pinion lock nut. |
|
|
398643600 |
GAUGE |
Used for measuring the total end play, extension end play and drive pinion height. |
|
|
498627100 |
SEAT |
Used for holding the low clutch piston retainer spring when installing snap ring. |
|
|
499577000 |
GAUGE |
Used for measuring the mating surface of the transmission to the end face of the reduction gear. |
|
|
499737000 |
PULLER |
Used for removing the reduction driven gear assembly. |
|
|
499737100 |
PULLER SET |
Used for removing the reduction drive gear assembly. |
|
|
498077600 |
REMOVER |
Used for removing the ball bearing. |
|
|
498937110 |
HOLDER |
Used for removing and installing the drive pinion lock nut. |
|
|
498677100 |
COMPRESSOR |
Used for installing the 2-4 brake snap ring. |
|
|
498437000 |
HIGH CLUTCH PISTON GUIDE |
Used for installing the high clutch piston. |
|
|
498437100 |
LOW CLUTCH PISTON GUIDE |
Used for installing the low clutch piston. |
|
|
899580100 |
INSTALLER |
Used for press-fitting the ball bearing of the transfer clutch. |
|
|
18675AA000 |
DIFFERENTIAL SIDE OIL SEAL INSTALLER |
Used for installing the differential side retainer oil seal. |
|
|
398497701 |
SEAT |
Used for installing the needle bearing. |
|
|
899524100 |
PULLER SET |
Used for bolt only. • Used together with the PULLER SET (499737100). • Used together with the PULLER (499737000). (1) Puller (2) Cap |
|
|
398744300 |
PISTON GUIDE |
• Used for measuring the contact surface of the transmission mating surface to the multi-plate clutch end face. • For VTD model. |
|
|
18482AA080 (Newly adopted tool) |
CARTRIDGE |
Used for diagnosing electrical system. |
|
|
22771AA030 |
SUBARU SELECT MONITOR KIT |
Used for diagnosing electrical system. • English: 22771AA030 (without printer) • German: 22771AA070 (without printer) • French: 22771AA080 (without printer) • Spanish: 22771AA090 (without printer) |
|
TOOL NAME |
REMARKS |
|
Depth gauge |
Used for measuring the transmission end play. |
|
Thickness gauge |
Used for measuring clearance of the clutch, brake and oil pump. |
|
Micrometer |
Used for measuring thickness of the drive pinion. |
|
Spring scale |
Used for measuring the starting torque of the drive pinion. |
|
Circuit tester |
Used for measuring resistance and voltage. |
|
TORX® T70 |
Used for installing and removing the differential gear oil drain plug. |
|
Push/pull gauge |
Used for measuring each piston stroke. |