1. Install the detention spring to the transmission case.
Tightening torque:
6 N·m (0.6 kgf-m, 4.4 ft-lb)
2. Insert the range select lever, and then tighten the bolt.
Tightening torque:
6 N·m (0.6 kgf-m, 4.4 ft-lb)
3. Insert the manual plate and parking rod.
|
(A) |
Bolt |
|
(B) |
Range select lever |
|
(C) |
Manual plate |
|
(D) |
Parking rod |
4. Insert the spring pin to the manual plate.
5. Install the oil pan and the control valve assembly. 
6. Turn over the transmission case to its original position.
7. Install the pitching stopper bracket.
Tightening torque:
41 N·m (4.2 kgf-m, 30.4 ft-lb)
8. Install and adjust the inhibitor switch.
9. Insert the inhibitor switch and transmission connector to the stay.
|
(A) |
Transmission harness |
|
(B) |
Inhibitor switch harness |
10. Install the air breather hose.
11. Insert the input shaft while rotating it lightly by hand, and then check the amount of protrusion.
Normal protrusion A:
50 — 55 mm (1.97 — 2.17 in)
12. Install the torque converter clutch assembly.
13. Install the transmission assembly to the vehicle.