1. Apply a thin coat of ATF to the oil seal part of new ATF filter.
2. Install the ATF filter. Turn it by hand, being careful not to damage oil seal.
3. Tighten the ATF filter using ST.
Calculate the ATF filter tightening torque using following formula.
T2 = L2/(L1 + L2) × T1
T1: 14 N·m (1.4 kgf-m, 10.1 ft-lb)
[Required torque setting]
T2: Tightening torque
L1: ST length 78 mm (3.07 in)
L2: Torque wrench length
Example:
|
Torque wrench length mm (in) |
Tightening torque N·m (kgf-m, ft-lb) |
|
100 (3.94) |
7.7 (0.79, 5.7) |
|
150 (5.91) |
9.0 (0.92, 6.7) |
|
200 (7.87) |
9.8 (1.0, 7.2) |
NOTE:
Align the ST with the torque wrench while tightening the ATF filter.
| ST 498545400 | OIL FILTER WRENCH |
4. Fill ATF.
5. Inspect the level of ATF. 