1. Install the pitching stopper.
Tightening torque:
T1: 50 N·m (5.1 kgf-m, 37 ft-lb)
T2: 58 N·m (5.9 kgf-m, 43 ft-lb)
2. Install the air intake chamber. (Non-turbo model)
3. Install the intercooler. (Turbo model)
2. TRANSMISSION REAR CROSSMEMBER AND REAR CUSHION RUBBER
1. Install the rear cushion rubber.
Tightening torque:
39 N·m (4.0 kgf-m, 29 ft-lb)
2. Install the transmission rear crossmember.
Tightening torque:
T1: 35 N·m (3.6 kgf-m, 26 ft-lb)
T2: 70 N·m (7.1 kgf-m, 51.6 ft-lb)
3. Remove the transmission jack.
4. Install the front, center and rear exhaust pipes, and the muffler. (Non-turbo model)
5. Install the center, rear exhaust pipes and the muffler. (Turbo model)