1. Press-fit the new oil seal using ST and the press.
| ST 498057300 | INSTALLER |
2. Press-fit the dust cover.
3. Install the transfer clutch pipe to the extension case without bending the pipe.
|
(A) |
Extension case |
|
(B) |
Transfer clutch pipe |
4. Install the transfer clutch assembly to the case.
NOTE:
• Be careful not to damage the seal ring.
• Press-fit the transfer clutch assembly to bottom of bearing shoulder completely.
|
(A) |
Transfer clutch assembly |
|
(B) |
Extension case |
1. Press-fit the new oil seal using ST and the press.
| ST 498057300 | INSTALLER |
2. Press-fit the dust cover.
3. Install the transfer clutch pipe to the extension case without bending the pipe.
4. Install the test plug.
Tightening torque:
13 N·m (1.3 kgf-m, 9.4 ft-lb)
|
(A) |
Test plug |
|
(B) |
Extension case |
5. Insert the multi-plate clutch, drive plate, driven plate and spring retainer.
|
(A) |
Spring retainer |
|
(B) |
Multi-plate clutch piston ASSY |
6. Install the circlip using ST1, ST2 and ST3.
| ST1 398673600 | COMPRESSOR |
| ST2 498627100 | SEAT |
| ST3 398663600 | PLIERS |
