1. Take out the transfer clutch assembly by lightly tapping the end of rear drive shaft with a plastic hammer.
NOTE:
Be careful not to damage the oil seal of the extension.
|
(A) |
Extension case |
|
(B) |
Transfer clutch assembly |
2. Remove the transfer clutch pipe without bending the pipe.
|
(A) |
Extension case |
|
(B) |
Transfer clutch pipe |
3. Remove the dust cover from extension case.
4. Remove the oil seal from the extension case.
1. Extract the circlip with ST1, ST2 and ST3 and the press.
| ST1 398673600 | COMPRESSOR |
| ST2 498627100 | SEAT |
| ST3 398663600 | PLIERS |
2. Remove the test plug.
|
(A) |
Extension case |
|
(B) |
Test plug |
3. Remove the clutch piston using compressed air.
4. Remove the transfer clutch pipe without bending the pipe.
5. Remove the dust cover from extension case.
6. Remove the oil seal from the extension case.