1. Install the drive plate and driven plate to the center differential carrier.
2. Measure the distance “A” from the end of ST to the multi plate clutch piston using ST.
| ST 398643600 | GAUGE |
|
A |
Measured value |
3. Using the ST, measure the height “B” from the transmission case mating surface to end of ST.
| ST 398744300 | PISTON GUIDE |
|
B |
Measured value |
4. Calculation formula:
T = A − B + 0.45 mm
[T = A − B + 0.0177 in]
Initial standard:
0.2 — 0.6 mm (0.008 — 0.024 in)
Limit thickness:
1.6 mm (0.063 in)
If the clearance exceeds the limit thickness, replace the plate set (drive and driven plate). Select a multi-plate clutch piston retaining plate that will bring clearance within the default standard value.
|
Retaining plate | |
|
Part number |
Thickness mm (in) |
|
31589AA041 |
1.6 (0.063) |
|
31589AA050 |
2.0 (0.079) |
|
31589AA060 |
2.4 (0.094) |
|
31589AA070 |
2.8 (0.110) |