1. BACK-UP LIGHT SWITCH & NEUTRAL POSITION SWITCH
1. Install the back-up light switch & neutral position switch with the harness.
Tightening torque:
32.3 N·m (3.3 kgf-m, 23.8 ft-lb)
|
(A) |
Neutral position switch (Brown) |
|
(B) |
Back-up light switch (Gray) |
2. Connect the connectors of back-up light switch & neutral position switch.
3. Install the air intake duct and air cleaner case. (Non-turbo model) 
4. Install the intercooler. (Turbo model)
5. Connect the battery ground cable to the battery.
1. Install the high-low switch.
Tightening torque:
32.3 N·m (3.3 kgf-m, 23.8 ft-lb)
2. Attach the high-low switch cable to the clamp.
3. Connect the high-low switch connector.
4. Install the air intake duct and cleaner case.
5. Connect the battery ground cable to the battery.