HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > In-vehicle Sensor (Auto A/C Model)

REMOVAL

1. LHD MODEL

1. Disconnect the ground cable from the battery.

2. Remove the instrument panel lower cover.

3. Remove the in-vehicle sensor from the instrument panel.

4. Disconnect the connector and aspirator hose.

CAUTION:

Be careful not to damage the sensors and interior trims when removing.

2. RHD MODEL

1. Disconnect the ground cable from the battery.

2. Remove the instrument panel lower cover.

3. Remove the in-vehicle sensor from the instrument panel lower cover.

4. Disconnect the connector and aspirator hose from the in-vehicle sensor.

CAUTION:

Be careful not to damage the sensors and interior trims when removing.