• Reconnect the connectors and hoses securely.

After reconnection, make sure each part operates normally.

• Be careful with the airbag system wiring harness which passes near electrical parts and switches.

• All airbag system wiring harness and connectors are colored yellow. Do not use a tester equipment on these circuits.

• Care must be taken when connecting the washer hose so that no bending, jamming, etc. occurs.

• If even a small amount of silicon oil or grease enters tank and washer fluid passages, an oil film will be formed on the glass and will cause the wiper to chatter and judder. Make sure that no oil comes into contact with the system.