WARNING:
The airbag system is fitted with a backup power source. After disconnecting the battery ground cable, the airbag may deploy if you do not wait for 20 seconds before starting the service of airbag system.
1. While pressing the headrest lock button, remove the headrest.
2. Tilt the backrest forward, and slide the seat forward.
3. Remove the bolt cover, and remove the two bolts at the rear side of slide rail.
4. Slide the seat backward, and remove the two bolts at the front side of slide rail.
5. Disconnect the ground cable from battery, and wait for more than 20 seconds before starting work.
6. Disconnect the connector under the seat.
• Seat belt warning light connector (Driver’s seat)
• Side airbag connector (Model with side airbag)
• Seat heater connector (Model with seat heater)
7. Remove the front seat from vehicle.