1. Disconnect the ground cable from the battery.
2. Remove the lower cover. 
3. Remove the rear fog light switch.
|
(1) |
Lower cover |
|
(2) |
Rear fog light switch |
4. Connect the power supply as shown in the figure, and measure the resistance of rear fog light switch.
|
Switch |
Terminal No. |
Standard |
|
OFF |
3 and 5 |
1 MΩ or more |
|
ON |
Less than 1 Ω |
5. If the measured value is out of standard, replace the switch.
Measure the resistance between rear fog light relay terminals when connecting terminal No. 4 to the battery positive terminal and terminal No. 3 to the battery ground terminal.
|
Continuity |
Terminal No. |
Standard |
|
Yes |
1 and 2 |
Less than 1 Ω |
|
No |
1 MΩ or more |