1. Replace the belts, if crack, fraying or wear is found.
2. Check the V-belt tension and adjust it if necessary by changing the generator installing position or idler pulley installing position. 
Belt tension
(A)
When replaced: 7.0 — 9.0 mm (0.276 — 0.354 in)
When reusesd: 9.0 — 11.0 mm (0.354 — 0.433 in)
(B)
When replaced: 7.5 — 8.5 mm (0.295 — 0.335 in)
When reusesd: 9.0 — 10.0 mm (0.354 — 0.394 in)
|
(A) |
Front side belt |
|
(B) |
Rear side belt |
|
C/P |
Crank pulley |
|
GEN |
Generator |
|
P/S |
Power steering oil pump pulley |
|
A/C |
A/C compressor pulley |
|
I/P |
Idler pulley |