| CHECK MODE DOOR ACTUATOR GROUND CIRCUIT. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connector from the auto A/C control module. 3) Measure the resistance of the harness between the auto A/C control module and mode door actuator. Connector & terminal (i48) No. 16 — (B77) No. 10: |
| QUESTION | |
|
Is the resistance less than 1 Ω? | |
| Yes | No |
|
Replace the mode door actuator. |
Repair the harness between auto A/C control module and mode door actuator. |