| CHECK POWER SUPPLY FOR AIR MIX DOOR ACTUATOR POSITION SWITCH. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the air mix door actuator connector. 3) Turn the ignition switch and AUTO switch to ON. 4) Measure the voltage between auto A/C control module connector terminals. Connector & terminal (i48) No. 7 (+) — (i48) No. 16 (−): |
| QUESTION | |
|
Is the voltage approx. 5 V? | |
| Yes | No |
|
|
Replace the auto A/C control module. |
