| CHECK HARNESS BETWEEN AUTO A/C CONTROL MODULE AND COMBINATION METER. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connector from auto A/C control module and the combination meter. 3) Measure the resistance of harness between the auto A/C control module and combination meter. Connector & terminal (i10) No. 30 — (i48) No. 14: |
| QUESTION | |
|
Is the resistance less than 1 Ω? | |
| Yes | No |
|
|
Repair the open circuit of the harness between auto A/C control module and combination meter. |
