| CHECK PASSENGER’S AIRBAG MODULE. |
|
1) Turn the ignition switch to OFF, disconnect the battery ground cable, and wait for 20 seconds or more. 2) Remove the glove box. 3) Disconnect the connectors (AB27) and (AB4) of the passenger’s airbag. 4) Connect the connector (1P) in the test harness P to connector (AB4). 5) Connect airbag resistor to connectors (2P) and (3P) in the test harness P. 6) Connect the battery ground terminal and turn the ignition switch to ON. |
| QUESTION | |
|
Does the airbag warning light illuminate for 6 seconds then turn off? | |
| Yes | No |
|
Replace the passenger’s airbag module. |
|
