| CHECK FRONT SUB SENSOR (LH) AND AIRBAG HARNESS. |
|
1) Turn the ignition switch to OFF, disconnect the battery ground cable, and wait for 20 seconds or more. 2) Disconnect the connector (AB3) from airbag control module, and connect the connector (1R) in the test harness R to connector (AB3). 3) Measure resistance between connector (3R) terminals in the test harness R. Connector & terminal (3R) No. 6 — (3R) No. 8: |
| QUESTION | |
|
Is the resistance 750 — 1 KΩ? | |
| Yes | No |
|
Replace the airbag control module. |
|
