| CHECK SIDE AIRBAG HARNESS (RH). |
|
1) Turn the ignition switch to OFF, disconnect the battery ground cable, and wait for 20 seconds or more. 2) Disconnect the connector (AB20) from the seat belt pretensioner (RH). 3) For a model with lap seat belt pretensioner, disconnect the connector (AB30) from the lap seat belt pretensioner. 4) Disconnect the airbag resistor from test harness F. 5) Disconnect connector (AB8) from airbag control module. 6) Connect connector (1R) in the test harness R to the connector (AB8). 7) Measure resistance between connector (3R) in the test harness R and connector (3F) in the test harness F. Connector & terminal (3R) No. 18 — (3F) No. 4: (3R) No. 20 — (3F) No. 3: |
| QUESTION | |
|
Is the resistance less than 10 Ω? | |
| Yes | No |
|
|
Replace the side airbag harness along with the body harness. |
