| CHECK AIRBAG MAIN HARNESS. |
|
1) Remove the instrument panel lower cover and disconnect the connectors (AB26) and (AB2). 2) Disconnect the connectors (AB27) and (AB4) of the passenger’s airbag. 3) Disconnect the connector (AB3) from airbag control module, and connect the connector (1R) in the test harness R. 4) Connect the battery ground terminal and turn the ignition switch to ON. 5) Connect two connectors, (5R) and (6R) in the test harness R. NOTE: After the fault has been cleared, disconnect the connectors (5R) and (6R). |
| QUESTION | |
|
Does the airbag warning light go off? | |
| Yes | No |
|
|
|
