| CHECKING THE GROUND CIRCUIT. |
|
1) Turn the ignition switch to OFF, disconnect the battery ground cable, and wait for 20 seconds or more. 2) Disconnect the connector (AB3) from airbag control module. 3) Connect connector (1R) in the test harness R to the body harness connector (AB3). 4) Measure resistance between the connector (2R) in the test harness R and chassis ground. Connector & terminal (2R) No. 10 — Chassis ground: (2R) No. 11 — Chassis ground: |
| QUESTION | |
|
Is the resistance less than 10 Ω? | |
| Yes | No |
|
Replace the airbag control module. |
Repair the chassis ground circuit. |
