| CHECK STOP LIGHT & BRAKE SWITCH CIRCUIT. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the stop light & brake switch harness connector. 3) Turn the ignition switch to ON. 4) Measure the voltage between harness connector terminal and chassis ground. Connector & terminal (B65) No. 2 (+) — Chassis ground (−): |
| QUESTION | |
|
Is the voltage 10 V or more? | |
| Yes | No |
|
|
• Check fuse No. 16 (in fuse & relay box). • Check for open or short circuit in the harness between stop light & brake switch and fuse & relay box. |
