CHECK NEUTRAL POSITION SWITCH.

1) Connect the Subaru Select Monitor to the data link connector.

2) Turn the ignition switch and Subaru Select Monitor switch to ON.

3) Select {Engine Control System} from the main menu.

4) Then, select {Current Data Display & Save}.

5) Check the neutral position switch signal by shifting the select lever to “P” or “N” range.

QUESTION

Is Subaru Select Monitor ON when select lever is shifted into “P” or “N” range? Is Subaru Select Monitor OFF when select lever is shifted to a range other than the “P” or “N” range?

Yes No

Replace the ECM.