CHECK NEUTRAL POSITION SWITCH CIRCUIT.

1) Turn the ignition switch to OFF.

2) Disconnect the neutral position switch harness connector.

3) Turn the ignition switch to ON.

4) Measure the voltage between harness connector terminal and chassis ground.

Connector & terminal

2.0 L LHD model, 2.5 L non-turbo model:

(B25) No. 2 (+) — Chassis ground (−):

2.0 L RHD model:

(B25) No. 1 (+) — Chassis ground (−):

2.5 L turbo model:

(B128) No. 1 (+) — Chassis ground (−):

QUESTION
Is the voltage approx. 5 V?
Yes	No
	Check for open or short in the harness between neutral position switch and ECM.