| CHECK CRUISE INDICATOR LIGHT CIRCUIT. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the harness connector of the combination meter. 3) Turn the ignition switch to ON. 4) Measure the voltage between harness connector terminal and chassis ground. Connector & terminal (i10) No. 9 (+) — Chassis ground (−): |
| QUESTION | |
|
Is the voltage 10 V or more? | |
| Yes | No |
|
|
• Check fuse No. 13 (in fuse & relay box). • Check for open or shorted circuits between the combination meter and fuse & relay box. |
