| CHECK HARNESS CONNECTOR BETWEEN VDCCM AND CHASSIS GROUND. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connector from VDCCM and transmission. 3) Measure the resistance of the harness between VDCCM and chassis ground. Connector & terminal (B310) No. 1 — Chassis ground: (B310) No. 55 — Chassis ground: |
| QUESTION | |
|
Is the resistance less than 1 Ω? | |
| Yes | No |
|
|
Repair the open circuit of the harness between the VDCCM and inhibitor switch connector, and the poor contact of connector. |
