CHECK VDCCM OUTPUT VOLTAGE.

1) Turn the ignition switch to OFF.

2) Disconnect the connectors from VDCCM.

3) Remove the VDCCM connector cover.

4) Connect the connector to the VDCCM.

5) Turn the ignition switch to ON.

6) Measure the voltage between VDCCM and chassis ground.

Connector & terminal

(B310) No. 27 (+) — Chassis ground (−):

QUESTION

Is the voltage 10 — 15 V?

Yes No

Repair the harness between yaw rate sensor and VDCCM.