CHECK VDCCM OUTPUT VOLTAGE.

1) Turn the ignition switch to OFF.

2) Disconnect the connectors from VDCCM.

3) Remove the VDCCM connector cover.

4) Connect the connector to the VDCCM.

5) Turn the ignition switch to ON.

6) Measure the voltage between VDCCM and chassis ground.

Connector & terminal

(B310) No. 50 (+) — Chassis ground (−):

QUESTION
Is the voltage 10 — 15 V?
Yes	No
	Repair the harness between yaw rate & lateral G sensor and VDCCM.