| CHECK OPEN CIRCUIT FOR OUTPUT HARNESS AND GROUND HARNESS OF YAW RATE & LATERAL G SENSOR. |
|
1) Connect the connector to the yaw rate & lateral G sensor. 2) Disconnect the connectors from VDCCM. 3) Measure the resistance between the VDCCM connector terminals. Connector & terminal (B310) No. 11 — No. 64: |
| QUESTION | |
|
Is the resistance between 4.3 — 4.9 kΩ? | |
| Yes | No |
|
|
Repair the harness between yaw rate & lateral G sensor and VDCCM. |
